Shoe E (with parapet wall) (1)
Shoe E (self-supporting base) is the
solution when it is not possible to provide a fixing to either a parapet
wall or the roof slab. It enables rapid installation, without piercing the
roof finish.
It also allows an
access path to be delineated, forms an escape corridor, or forms a barrier
around a rooflight, roof access, etc.
Counterweight
(4) The
concrete counterweights of shoe E are enclosed within a high-density
polyethylene casing with rounded edges, which: –
protect the counterweight from the risk of
breaking or cracking; – prevent any
damage to the roof covering,
as the HDPE casing acts as a
resilient material; – makes them
easy to handle, using the
recesses provided; – avoids injury
when handling.
The
counterweights are screw-fixed to the rails (3).
On request, a security screw can be provided to prevent malicious removal
of the counterweight.
Pads (2)
The protective pads at the fronts of
the rails protect against puncturing the roof finish.
Shoe
E (without parapet wall) If
there is no perimeter parapet wall, an adapted version of shoe E will be
needed. Please seek our advice.
Compatible with fixed
post... straight
curved angled 15°/30°
Skirting
(5) If there is no perimeter parapet wall, or if the height
of the existing parapet wall is less than 150 mm, a skirting will
have to be provided at the base of the safety railing.
The system is
supplied made-to-mea- sure, with all its fixings, jointing elements and
internal and external angle fittings.
: Barrial self-supporting - on roof slab : Dani Alu conceives and makes aluminum elements for the building, Find all the useful information on self-supporting barrial on roof slab, solution of security for roofs and terraces like self supporting roof safety rail and self supporting roof safety railing.
